The thick paste formula clings to vertical surfaces without runs or drips. Wear chemical-resistant gloves and chemical splash goggles.
Shake well and open can slowly to relieve pressure. Pour into a metal container and apply with a paint brush to a small area up to 9 sq ft. Brush in one direction only.
Leave the area and let the stripper do the work. After minutes, test scrape a small area to see if finish is ready for removal.
Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses.
Multiple coats or stubborn finishes may require repeat application. Use a clean abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove any residue.